A car tail lift is a convenient piece of equipment for loading and unloading. Structurally, it is a platform on which a box, container, and any other cargo are placed, which is placed in the optimal position for loading and unloading. Such devices are installed on both trucks and trailers.
There are different tail lift control systems: from classic manual to remote. They were developed gradually for the convenience and comfort of the operator, more advanced systems provide high accuracy when choosing the platform position. In this article, we will talk about the control methods and functions of this equipment.
Location of the tail lift platform
Before considering the control features, let's look at the main positions of the platform - its location is selected for ease of loading or unloading. We should immediately note that the functionality depends on the type of model: the simplest hydraulic platform can only move in two positions.
Main positions of the tail lift platform:
- Vertical - this position is also called neutral, in this position the platform "folds", can be placed close to the rear door, and on some cars or trailers - replace the rear doors.
- Horizontal - when the tail lift is in the "unfolded" form. The platform can be located at the level of the car body or the ground, depending on the type of work.
- Inclined - not all models have this location. The platform is positioned at a certain angle for entering or exiting it.
The control system provides the choice of the optimal position of the tail lift: lifting, lowering and tilting. For the last position, you can choose the optimal angle.
Platform control systems
Two types of hydraulic platform control systems are installed on the equipment - electronic and electric. The latter are the most widespread, which is explained by the simplicity and reliability of such equipment. The equipment is driven by a stationary, remote manual or foot control unit. Electronic control is remote, which does not require the presence of an operator near the platform.
Let's note the features of different types of tail lift control:
- Stationary - the control unit is located on the car next to the tail lift itself. For direct control, moisture-proof buttons can be provided, pressing which transmits a signal to the equipment units.
- Remote manual control - similar to the previous one, only the remote control is remote and can be connected to the stationary unit using a cable. As a rule, it has buttons for lifting, lowering and tilting the platform.
- Remote foot control - the foot control is equipped with special buttons that are responsible only for the position of the tail lift. For additional protection, they are equipped with wear-resistant pads.
- Remote control - or radio control. Such models are convenient because they are not tied to the equipment, and they can be controlled from almost any distance. Modern systems can connect several devices at once.
Our company offers a wide range of tail lifts, we can manufacture a custom platform according to your requirements. This is modern equipment, equipped with convenient and reliable control. To place an order, just contact us in a convenient way and agree on all the details.