SL 2000 elevator
- Tail lifts 12 and 24 v, lighter in weight than European ones;
- The cost of our tail lift is 30% lower than its European counterparts;
- European technologies applied for production (Italy, Germany, Belgium);
- Spare parts prices are much lower than European ones;
- Availability of basic spare parts from repair dealers in the regions;
- Our original spare parts are compatible with spare parts for foreign tail lifts;
- The electrical block is assembled on a relay - spare parts from any auto shop will do;
- The design of the hydraulic station is convenient for repairs, the driver can fix minor repairs himself;
- A complete set of documents for operation, repair, installation of a tail lift;
- Installation of a hydraulic station on either side of the van at the customer's choice;
- Installing the main control panel on either side of the van;
- 2 years warranty.
|Capacity||1500-2000 kg for transport from 10 tons|
|Platform Height||1600/1700 mm|
|Platform Width||2550 mm|
|Lever Length||940/1000 mm|
|Number of hydraulic cylinders||4|
Use of a 2000 kg capacity tailgate
This 2,000 kg capacity hydroboard is a movable platform based on an aluminum profile and equipped with a hydraulic drive. It is installed on the end of the body of trucks over 10 t, trailers and semi-trailers. Its main function is to facilitate lifting operations by mechanized vertical movement of unloaded or loaded goods.
The maximum payload of 2000 kg indicated for the tail lift is the maximum payload, which may not be exceeded if there is a risk of damage. During unloading, the entire load should be positioned in the center of the platform, not on the edge. Otherwise it may become deformed and lose rigidity.
To clarify the rules of hydroboard operation and get advice on your choice, call us or leave your request on our website.